Description

CarFix 5-in-1 Kit (R134a) – Your Personal Air Con Service Station

Is the heat in your car unbearable? Are your windows constantly steaming up, or is there a damp, musty smell coming from the vents?
Stop wasting time booking appointments and paying over the odds at garages. Regenerate your air conditioning on your own driveway or in your parking space.

The CarFix 5-in-1 Kit is a complete rejuvenation treatment for your AC system. We’ve packed everything you need into a single can to restore full cooling power to your car—safely, quickly, and ecologically.

Most products on the market simply top up the refrigerant. CarFix features an innovative formula that acts as a comprehensive AC service in 5 stages:

💧 Drying Agent: Removes moisture from the system (without needing a vacuum!), preventing corrosion and valve freezing.
🛡️ Leak Stop: Seals micro-leaks in aluminium components.
⭕ O-Ring Conditioner: Regenerates hardened rubber seals and O-rings, restoring tightness.
🛢️ Lubricant: Lubricates the compressor, protecting it from seizing (the most expensive failure to fix!)
❄️ Refrigerant Gas: An eco-friendly, lighter replacement for R134a. It works more efficiently at lower pressures, reducing strain on the system.

(Note: 1 can of CarFix = 453g of R134a. Sufficient for most passenger cars).

This product fits cars manufactured between 1994 and 2016 (R134a system) equipped with a Low-Pressure (LP) port (11 mm diameter).

🛑 ATTENTION – EXCEPTIONS:
Before buying, please check under the bonnet:

Do you own a Renault (Laguna II, Megane II/III, Espace IV) or a Nissan (2003-2009)?
These cars often lack an LP port and only have a High-Pressure (HP) port. If you see only one valve, you will need an adapter.
👉 [CLICK TO ADD HP/LP ADAPTER]
Is your car a 2017 model or newer?
You likely require R1234yf gas. This kit will NOT fit.
👉 [GO TO R1234yf KIT]

(No tools or mechanical knowledge required)

Prep the hose: Ensure the pin in the valve is fully retracted (turn the knob fully anti-clockwise/left), then screw the can firmly onto the hose.
Connect: Start the engine, set the temperature to the lowest setting and the AC blower to “MAX”. Locate the LP port under the bonnet (usually on the thicker aluminium pipe) and snap on the quick-coupler (you will hear a “click”).
Fill: Turn the knob clockwise/right (to pierce the can), turn the can upside down, and open the valve.
Monitor: Charge until the gauge needle stabilizes in the green zone (40-45 PSI).
Finish: Close the valve, disconnect the hose, and enjoy the cool air!