NEW BATH SWISS 2K ENAMEL KIT PAINT BATH REPAIR REFURBISHING TOUCH UP CHIP PEN
New Bath Swiss Formula White 2K Quick Dry Enamel Bath & Appliance Paint 500 ml
For Application using Brush. Roller or Spray Paint Gun Two-component High Gloss Quick Drying modern enamel paint for resurfacing cast iron. enamel and acrylic bathtubs.
Suitable for painting toilets. sinks. showers. tiles etc.
Suitable also for other surfaces such as
(boats. yachts. air planes)
steel and aluminium as well as plastic elements.
Professional two-component product used and recommended by companies which are specialized in baths renovations
Will save you lots of money instead of replacing a bath just paint it.
Designed for use one surfaces above and below the waterline
Guarantees high quality coating
Special composition ensures obtaining of surface resistant to abrasion . cracking . scratching and flaking with a high covering power.
If there are larger chips in surface it is recommended to fill them up first using appropriate filler. for example Technicqoll White Epoxy designed specially for that purpose.
Short drying time: 16 h – hardened Resistant to touch after 1-2 h
Next layer application:
minimum 60 min.
maximum 18-24 h
Super gloss and long lasting colour. does not become yellow.
High resistance to UV Perfectly covers and fills. creating diamond coating Efficiency of 500 ml : 7 m². enough for bath and sink
Good filling properties
Resistant to weather and salt water
Resistant to temperatures up to 80°C
For indoor and outdoor use
Gloss White Standard RAL 9016
Enamel : 380 ml
Curing Agent :120 ml High gloss enamel based on acrylic – polyurethane resin with hardener
Please note that it has a strong smell
How to Use
Surface to be painted should be clean and free of grease.
Preparation of surface is crucial for ensuring a good result.
Clean the bath using abrasive cleaner and rinse thoroughly Sand surface with fine sand paper
Clean and degrease surface
The best result can be achieved by painting at a temperature of +18 C or higher
Mix components of tin A and B by pouring contents of can B into can A . it is designed to fit in there. then mix thoroughly
Wait for 20-30 minutes so enamel can start reacting with curing agent.in mean time you can prepare work area by covering all surfaces around. to protect from staining with paint
After mixing components enamel is suitable for use for about 4-6 hours.
Best effect can be obtained by applying several thin coat instead of one thick