FIBER MICRO – glass fibre reinforced putty.
Thanks to flexible polyester resins and short fibres it has higher elasticity than FIBER, maintaining high mechanical strength.
Soft and easy sanding makes its suitable for application even on large surfaces.
It has good adhesion to various substrates, including galvanized steel
Applied to substrates such as
- Polyester laminate Steel
- Galvanized steel
- Component acrylic primers
- Old paint
- Colour: Beige
Mixing ratio: putty – 100 parts by weight
Hardener – 2 to 3 parts by weight
From 20 to 30 min. At 20 C.
VOC limit. (Cat. II / B / b) = 250 g / l VOC <90 g / l
Do not apply directly on the ground reactive (wash primers), one-component acrylic and nitrocellulose.
How to use:
Mix very well until even in colour Follow the recommended amount of hardener 2-3 : 100 Apply a layer of no more than 3 mm thickness
The minimum temperature required for application is + 10 C.