UNI basic putty in our range.
Relatively hard and not very flexible. it is recommended mainly for machine sanding and repairing of small surfaces.
It has good adhesion to various substrates except galvanized steel.
Applied to substrates such as:
Polyester laminate Steel
Aluminum
Component acrylic primers
Old paint coatings
242 g Putty 8 g Hardener
Colour: Beige
Mixing ratio
UNI putty – 100 parts by weight
Hardener – 2 to 3 parts by weight
Drying time:
From 20 to 30 min. At 20 C.
VOC limit. (Cat. II / B / b) = 250 g / l VOC <90 g / l
Do not apply directly on the ground reactive (wash primers). one-component acrylic and nitrocellulose.
How to use
Mix very well until even in colour
Follow the recommended amount of hardener 2-3 : 100 Apply a layer of no more than 3 mm thickness
The minimum temperature required for application is + 10 C.
| Weight | 0.37 kg |
|---|
Reviews
There are no reviews yet.