DC REMOVER is used to remove most types of paint coatings, also furnace, in various industries, and when carrying out renovation works.
DC REMOVER is a means for removing varnish coatings from horizontal and vertical surfaces. It can only be used in cases where the substrate is not damaged, e.g. dissolubt, swelling.
Method of application
Dry the varnish coating intended to be removed from the substrate and clean from dust and grease. After thoroughly mixing, apply the DC REMOVER with a soft brush, spreading it evenly over the entire surface of the varnish coating. The period of time in which softening or softening occurs with the simultaneous separation of the coating from the substrate varies and ranges from a few to several dozen minutes. The softened coating along with the remover layer should be removed with putty. If washing once is not enough, repeat the action (e.g. in the case of several layers of varnish). After separating the coating from the substrate, remove the remnants of the membranes and remover by washing the surface with varnish gasoline and wiping dry.
Capacity: 1 liter of remover is enough to remove the varnish coating from the surface of 3 – 4 m2.
Reviews
There are no reviews yet.